Quick Start Guide How To Hem Curtains At Home

how to hem a curtain Useful

Unless you order custom-made drapes or take place to be very adept at hanging drape poles at the exact height you require for your details curtains, you will likely find yourself in a scenario, at some point, when you need to hem a pair of too-long drapes. And you may even tend to put it off as well as off and also off since it seems also tough or you’re fretted you’ll get it wrong.

how to hem curtains

Luckily, hemming your drapes in your home is much easier than you think. You do not need to cost a fortune obtaining your curtains customized by a specialist.

We’ve created a detailed overview to aid you to hem your drapes to the best size for your home windows.

Why Should You Hem Your Curtains?

Prefabricated drapes can be found in a few conventional sizes (generally 63, 84, 95, 108, or 120 inches). Windows do not always suit these measurements.

  • Customizing drapes isn’t simply for the design. Hemming likewise prevents the fabric from sagging on the floor, tearing, and positioning a stumbling risk. That’s why it’s necessary to hem your curtains to fit your home windows correctly.
  • With a few measurements as well as products, you can have excellent length drapes quickly. Before beginning any of these hemming methods, make certain your drapes are ready.
  • Some textiles diminish after laundering, so examine the care label on your curtains if you prepare to wash them typically. If your drapes are prone to shrinking, wash them before determining as well as hanging.
  • Next, iron your drapes to get rid of any kind of creases or wrinkles that will certainly prevent them from hanging straight.

Listed below we’ve outlined our preferred stitch, no-sew, and also tape methods for hemming drapes.

How to Hem Curtains: Sewing Method

Learn how to hem curtains by sewing in seven easy steps.

Below’s what you’ll need:

  • Tape measure or benchmark
  • Iron
  • Ironing board or big flat, padded surface area
  • Straight pins
  • Fabric scissors
  • Sewing device or hand-sewing needle
  • Thread to match your drapes

Action 1: Hang Curtains

First, discover the ideal length for your drapes by hanging them in the desired home window of your residence.

Hanging drapes can take some time, however, know that you do not have to opt for typical drape equipment that requires nails, screws, determining as well as drilling.

Action 2: Pull Curtains

After setting up your curtains, ensure they hang right without any creases.

Draw the material carefully towards the flooring to see the precise size. Be careful not to stretch it also tightly. It’s essential to observe just how much excess material you have so you can hem your curtains properly.

Step 3: Pin Curtains

Currently, area right pins where you would love to hem the curtains. Initially, decide if you desire your curtains to drift, kiss, or pool on the floor:

Drift: The drapes “float” less than one inch above the floor. A good option if you desire your curtains to hang right down without a break.

Kiss: The drapes forage the floor. This style is challenging to hang correctly, as it requires exact dimensions. Keep in mind to suit the length of the drape poles and curtain rings (if any kind of) you’re making use of.

Puddle: Longer drapes that flare out on the floor. This design is enchanting, feminine, and also old-world, excellent for drape in official areas. Use high-grade, thick fabric like velvet or linen.

Exactly how broad should the hem be? Constantly allow for a double-folded hem. This prevents the rough textile edge from showing when you reduce your drapes and develops a neat and clean look.

Longer drapes require longer hems and much shorter drapes need much shorter hems to look proportional:

  • Standard floor-length curtains ought to have a 3 to four-inch hem, plus an additional 3 to four inches for the dual fold. Your curtains should then be six to 8 inches much longer than where you position your pins.
  • Apron-length curtains should have a two-inch hem plus allowance for the double layer, so include 4 inches to your curtain length.

Instance: Let’s claim your window requires 84-inch curtains, however you located curtains you enjoy that are just readily available in a 96-inch size. Don’t immediately remove 12 inches! Here’s what the calculation would certainly look like to shorten your drapes:

  • 96-inch curtain
  • Deduct 3 inches for the hem
  • Deduct 3 inches for the double layer
  • = 6 inches required for the hem as well as dual-layer
  • 96– 6 = 90 inches required
  • Cut off 6 inches

Pro-tip: Unless your curtains are longer than they must be, think about hemming as opposed to cutting. If you slip up or decide to use the curtains in an additional room, you can reverse the hem and also re-hem them to the size you need.

Step 4: Measure Length for Sewing

Use your measuring tape or yardstick to make sure that the straight pins straighten evenly.

Bear in mind that most floors aren’t flawlessly leveled, so double-check measurements and straightness.

Step 5: Fold as well as Iron Hem

Next off, fold and iron twice: as soon as for the double-fold and once for the hem. Fold the material equally for the double-fold as well as a pin into place. Make certain to fold back toward the wrong side of the curtain. Iron the double-fold securely.

After that, fold the drape along the original pin line for the hem. Use the straight pins to remain to hold the hem in the area. Iron throughout, gradually and firmly to protect the fold of the hem. You can eliminate the straight pins once you end up ironing.

Step 6: Sew Curtains

You can sew by hand or make use of a stitching machine to safeguard the recently measured hem on your drapes. Objective to sew as close to the double-folded edge as feasible.

Step 7: Rehang Curtains

Once you sew the hem, it’s time to rehang the finished product. Give the drapes another quick press with your iron before placing them back up.

How to Hem Curtains: No-Sew Methods

how to hem

Exists a very easy way to hem curtains without stitching?

If you don’t own an embroidery machine or don’t have time to sew your curtains by hand, there are 2 no-sew approaches you can try: iron-on fusible bonding web or hem tape as well as glue. For either of these techniques, repeat actions 1 through 5 over.

The negative aspect of these no-sew techniques is that they are challenging (otherwise difficult) to remove. Think about these to be permanent hemming methods.

Iron-On Fusible Bonding Web as well as Hem Tape

Utilizing an iron-on fusible bonding web (like Stitch Witchery) is an easy means to hem your drapes without sewing. Fusible tape thaws when heated up, triggering a glue-like effect when you iron it.

Essential: Wash your curtains before using any type of kind of fusible product. Completing representatives and also sizing in the fabric may prevent the fusible tape from adhering to your drapes.

Below’s how to make use of hemming tape on curtains:

  1. Place the tape in between the top of your drape hem as well as your dual layer. Press with a hot iron till the fusible tape melts.
  2. Permit the tape to cool before relocating to the next section, so the fusing has time to stick completely. Constantly iron the tape between your textile layers, not on the tape directly, as it can melt to the iron.

Textile Glue as well as Hot Glue

For the best low-tech hemming approach, attempt utilizing glue! You can utilize either fabric adhesive (like Liquid Stitch) or warm glue (utilizing a low-temp glue gun) to hem your curtains.

After folding as well as ironing your drapes, utilize glue to safeguard your hem in place of sewing. Keep in mind that glue (especially hot glue) dries swiftly. Operate in tiny sections and press to bond for the best results.

Note: If you’re hemming sheer drapes, it’s ideal to stitch instead of utilizing a no-sew method when possible. Fusible web and glue will certainly reveal via large curtains, which isn’t suitable.

Add a comment